Posted on

How to Check Barcode Label and Wax Ribbon Size

How to Check Barcode Label and Wax Ribbon Size before proceed order.

Photo Below explained :

How to Check Barcode Label and Wax Ribbon Size

Barcode Label Sticker.

For the Barcode label sticker you need to provide the size of your label (width x height (mm)) as well as how many pcs of label you need put in rolls. such as 500pcs/roll, 1000pcs/roll and so on.

Beside the size of (width x height (mm)). You also need measure your label sticker roll core size (inch) as shown on photo above. You may also refer your barcode label printer user manual for label sticker specification.

Wax Ribbon

For the Wax Ribbon you need to provide the size of your ribbon width (mm) , core size (Inch) as shown on photo above. 

For more info you can directly contact our office : 03-89597527 or email us at sales@equest2u.com.my

Sample Label sticker roll

Sample Wax Ribbon With 2-core

Sample Wax Ribbon With 1-Core

 

 

Posted on

How to register user fingerprint – Fingerprint Attendance Malaysia Moven T135

How to register user fingerprint on Moven T135. Fingerprint Attendance Malaysia

Fingerprint Attendance Malaysia Moven T135

Step 01 : Press menu button

Fingerprint Attendance Malaysia Moven T135

Step 02: Select User Mgt (Menu Interface)

Fingerprint Attendance Malaysia Moven T135

Step 03: Select Add User (User Mgt Interface)

Fingerprint Attendance Malaysia Moven T135

Step 04: Select UserNm (Add User Interface)

Fingerprint Attendance Malaysia Moven T135

Step 05 : Input Char Name Using Keypad (Input Char Interface)

Moven T135 Full Manual CLICK HERE

Fingerprint Attendance Malaysia Moven T135

Step 06 : Example Want to Input M, press key pad number 6 (MNO) for M alphabet 

Fingerprint Attendance Malaysia Moven T135

Step 07 : Press OK. Number will show up for you to choose which alphabet want to insert.

Fingerprint Attendance Malaysia Moven T135

Step 08 : From step 07, press keypad number 1. M will be insert. And repeat from step 06 to complete the user / employee name.

Fingerprint Attendance Malaysia Moven T135

Step 09: Once Complete the user name. Press ESC to exit to Add User interface.

Fingerprint Attendance Malaysia Moven T135

Step 10 : Proceed to finger print registration. Select Finger

Fingerprint Attendance Malaysia Moven T135

Step 11 : Place the finger / thumb on the finger scanner to complete the registration. (Finger scanning need to verify 2 times)

Fingerprint Attendance Malaysia Moven T135

Step 12: Once complete the fingerprint registration. It will auto exit to Add User Interface

Fingerprint Attendance Malaysia Moven T135

Final Step : Once complete everything. Press ESC to exit the screen will ask Save? Just Press OK To Save It.

Moven T135 Full Manual CLICK HERE

Fingerprint Attendance Malaysia Moven T135

 

By Equest Enterprise

Posted on

How to Buy Punch Card Machine At Equest2u?

Hi, If you wish to enquiry / contact us directly please visit Contact Us for contact information.

Our Punch Card Machine / Time Recorder Link : Punch Card Machine Malaysia

For Klang Valley, Selangor Area. We Do provide cash on delivery on selected model of punch card machine / time recorder as well as help you setting / programmed it.

For Outside Klang valley Area. Order only proceed once the full payment was receive by us. Delivery method either by courier or local logistic transporter depend on area.

All Our punch card machine / time recorder come with 1 year standard manufacturing defects.

Punch card and card rack was included on selected model. Kindly contact use for more info. Visit Contact Us Now!!

We Supplied  more than 1,000 unit punch card machine to mostly corporate office, SME, SOHO, Small factory, Workshop, Restaurant, Construction site and many many more. We also provide after sales service such as repairing, punch card supply, setting and warranty claim.

Facebook : http://facebook.com/equest2u

Feel free contact us now. We will consult you which type of punch card machine suitable for your office.

 

By Equest Attendance Marketing

Posted on

How to enroll user fingerprint on NIGEN N-928s Time Attendance

How to enroll user fingerprint on NIGEN N-928s Time Attendance

Nigen N-928s Fingerprint Attendance

 

Step 01: Enter To Menu

Press Menu Button – Nigen N928s

 

Step 02: Select Enroll Icon

Enroll Icon – Nigen N928s

 

Step 03: Choose Finger to start Finger Print Registration  (Enroll mode)

Finger Menu – Nigen N928s

 

Step 04: Put your thumb / Finger print on the scanner (As shown in photo) to register thumb print. Repeat the finger print scan for 3 times to verify your thumb / fingerprint register correctly until it successful and completed.

Register Finger Print Process – First – Nigen N928s
Register Finger Print Process – First – Nigen N928s

 

Register Finger Print Process – First – Nigen N928s

 

Step 05: Once completed. Exit the program to try your finger print on fingerprint scanner

Finger Print Verify OK – Nigen N-928s

 

Nigen N-928s Fingerprint

Need To Purchase Another NIGEN N-928s ? Just CLICK HERE TO FIND OUT 

 

By Equest Enterprise

Posted on

How to set Door Access Panel DA3000

To reset to Factory Programming Password (Default Passowrd: 123456 )

Step1、Turn off power and connect bin 2&3 of RST(S1)。
Step2、Turn on power and buzzer gives 3 long buzz with green light flash fast。
If need to set Manager Card, now read two empty cards first one as Manager Add Card and
Second one as Manager Delete Card with red light flashing and continuous short buzz .
Step3、Turn off power, disconnect bin2&3 and connect bin 1&2 of RST。
Step4、Turn on power again.

How to set PIN For door access

Add Private Access Password(PIN)
Step: # Programming Passwo r d # 22 PIN #
Can enroll more than 1 PIN, Unlock door method : PIN #

Add card by input card No.

# Programming Passwo r d# 23 input card Number. #
Card No. is 10 -digit or 8-digit, machine auto -identify

Delete user by input card No.

# Programming Passwo r d# 43 input card Number #

Delete user by input PIN

# Programming Passwo r d# 44 input PIN #

 

For Full Manual Cilck > DA3000 User Manual For Download

Posted on

Moven T-135 Finger Print Attendance Instruction Manual

Register User

(Please READ Before Start Operate)

Download full manual here  Moven_T-135-instruction

HOW TO ADD USER

1 Press MENU
2 Select User Mgt
3 Select Add User
4 Select UserNm
5 Key In User Name
*Step to Key 1 Select the alphabet keypad
2 Press OK
3 Select the number
4 Repeat No.1 step for next alphabet
5 Once Complete Pree ESC

6 Proceed To Finger
7 Place the thumb on scanner to register the thumb print
Scan 2 times for verification
*If unsuccessful, try again
*Please place your thumb correctly
8 Once Complete, Press ECS To exit the programme

How To Add User In Excel Format (Prepare 1 USB Thumb Drive)
1 Press MENU
2 Select User Mgt
3 Select Download User **Remember plugin the thumb drive
4 Press OK
5 Once complete,Unplug the thumb drive
6 Plug in the thumb drive to PC
7 Double click the ” 01USERLIST.XLS”
8 Add User in Excel Format
(Format only accept number and alphabet)
**Key in symbol will cause the device hang)
9 Save the file, Please do not change the file name
10 Unplug the thumb drive from PC
11 Plug in the thumb drive to finger print device
12 Press MENU
13 Select User Mgt
14 Select Upload User
15 Press OK
16 Once Complete, Unplug the thumb drive
17 Press ESC to exit the programme

 

Shift Setting

(If shift no necessary, Set the shift to Null refer to “How to Select Shift For Different User” )

How To Edit Shift Table
1 Press MENU
2 Select Shift
3 Select Edit Shift
4 Select Shift 1
5 Select MON (Monday)
6 Select Section 1
7 Start-T (IN)
End-T (OUR)
Edit the time in both (IN & OUT) You prefer
*IN and OUT Must be a Number, NOT 00:00
*To disable the time, Please Edit the time to 00:00
8 For SECTION 2 & 3 Repeat From Step 6
9 For Next day (TUE, WED, THU, FRI, SAT & SUN) repeat from step 5 to step 8

**Cut Off Time
Normal Cut Off time will be 00:00
If your work place is close over mid night such as 01:00am, please change it to 01:30

*** Maximum 5 Shift available In This Device

How To Edit Shift Table In Excel Format (Prepare 1 USB Thumb Drive)
1 Press MENU
2 Select Shift
3 Select Download Shift **Remember plugin the thumb drive
4 Press OK
5 Unplug the thumb drive
6 Plug in the thumb drive to PC
7 Double click the ” 01SHIFT.XLS”
8 Edit the shift table in Excel
9 Save the file, Please do not change the file name
10 Unplug the thumb drive from PC
11 Plug in the thumb drive to finger print device
12 Press MENU
13 Select Shift
14 Select Upload Shift
15 Press OK
16 Once Complete, Unplug the thumb drive
17 Press ESC to exit the programme

How to Select Shift For Different User
1 Press MENU
2 Select User Mgt
3 Select UserView
4 Select the user (ViewAllUser Mode)
5 Select Edit
6 Select Shift (Press down cursor button to find the shift selection)
7 Press OK
8 Select The Shift you want to assign to the user
9 Press OK
10 ESC 2 Times
11 To select next user, Other wise just Press ECS to Exit to programe

 

Download Report

How to download report (Prepare 1 USB Thumb Drive)
1 Press MENU
2 Select Report
3 Select Clock_Report / Daily_Report
4 Select The Date you prefer on report
5 Complete The Start and End Date
6 Press ESC to start report **Remember plugin the thumb drive
7 Press OK to proceed download the report to thumb drive
8 Once Complete, ECS to exit the programme

Set Manager Prevent Unauthorise Login

How to assign the manager / Supervisor (prevent unauthorise login)
1 Press MENU
2 Select User Mgt
3 Select UserView
4 Select the Prefer User
5 Select Edit
6 Select Admin (Press down cursor button to find the shift selection)
7 Press OK
8 Choose Manager
9 Press OK
10 Press ESC, Press OK to Save
11 Press ECS To exit the programme

**Kindly take note: Maximum Up to 10 Managers only
PLEASE TRY SCAN/VERIFY FINGER BEFORE ASSIGN MANAGER
TO PREVENT UNABLE ACCESS THE DEVICE
**ONCE DEVICE UNABLE ACCESS DUE TO USER MISTAKE,
CHARGE WILL BE APPLY BY THE MANUFACTURE
TO UNLOCK THE DEVICE.

Setting Time & Date

How to Set Time And Date
1 Press MENU
2 Select Setup
3 Select System
4 Select Time
5 Select Time Again
6 Change /set the time/Date you prefer correctly
7 Enter the date/time you wish to enter and press OK to next setting
8 Once Complete, Press ECS To exit
9 Save Screen will prompt out, press OK to continue
10 Once Complete, Press ECS To exit the programme

Download full manual here  Moven_T-135-instruction

Prepare by Equest Enterprise For MOVEN T-135 Fingerprint Time Attendance